What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 11:21

This is 'the assistant's answer'
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Edit 2024–10.
Upvotes:
Here is a simplified AC power diagram.
These devices are installed between the “hot” and “neutral” and protective ground.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There are two important concepts here.
Hypertension: New drug shows strong results in managing blood pressure - Medical News Today
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The MOV will conduct when the voltage exceeds 50% of line voltage.
He then asserts :
How much of lounge pianists playing is from repertoire, and how much is improvised?
He then describes Rainy Season and Lightning.
[old diagram got deleted by accident]
but I think this circuit , shows a few more pieces.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
(Dc diagram shown, AC is similar).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Why do I feel so tired all the time even after a good night’s sleep?
Barnstars:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
One
Scientists Crack 30-Year Mystery Behind “Holy Grail” Cancer Drug - SciTechDaily
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
but this device (an Inductor) … impedes the rapid changes in the current.
what exactly is a ‘surge’ protector?
Americans Are Growing Less Interested in Buying Electric Vehicles, Study Says - Road & Track
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
There are three different concepts here that are getting confused.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Treasury yields tick higher after latest U.S. jobs data release - CNBC
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–16 [ OO OLAOYE OYEBODE ]
In schematic diagrams this is the symbol for a fuse:
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Now when you have a certain ac resistance, then a current flows in a loop.
It also is a device that limits the change in current flow.
Weekend Box Office: LILO & STITCH KO’s KARATE KID LEGENDS - boxofficepro.com
One is “what exactly is in a ‘surge protector’ ? ”
These are simplified answers to the original question, and does not change anything I wrote above.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Can you write a letter to your first love without mentioning his/her name?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
a photo is worth a thousand words.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Season ends for Husker baseball with historic loss to Oklahoma - KETV
So, the voltage could go up to 500 volts, and the fuse will not open up.
A circuit breaker is similar, but is resettable.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Nasa delays next flight of Boeing’s alternative to SpaceX Dragon - The Edge Malaysia
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Because the load is inductive, the current lags the voltage.(by a bit).
It seems Mohan does not understand the difference between a comment and an Answer.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
At least they know the answer if they wanted it.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
so, what happens?
I post the exact comment here.
The bolt then partially travels down the line to your home.
2024–10–10[John johnson John Johnson ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is where this question deviates from being a 'generic' question, and becomes more specific.
nine
What does a fuse do?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But… the neutral is now “floating” because of the 1 ohm resistance.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
the problem then depends on "how fast does the fuse operate?".
2024–10–14 [Omar Gharbi Omar Gharbi ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is where the MOV conducts again, and dissipated the energy.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The other is “what does a “fuse” do?”
This one hit behind the barn.
At one ohm, the resistor has a maximum of 1 watt power.
First Sentence:
A fuse is a non-resetable over current circuit protector.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
But it can get overloaded, and no longer works.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
For this case there are devices called Metal oxide varistors (MOV).
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
What is lightning?
[image of Common-mode choke]
eight
This device then solves the entire problem.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
An AC voltage/ current source, and an ac inductive load.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then describes the function of a fuse.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The third is lightning and “how it gets conducted into a home.”